180-LED "Super Bright" Motorcycle Accent Light Kit-RemoteControl


Please Choose:






Add to Cart:
  • Shipping Weight: 1.5lbs
  • 35 Units in Stock



  • $184.99

     This is the BRIGHTEST Single Color Flexible Strip Product on the Market today...

    There is nothing like it at any price... Some sellers say "Hyper Bright"... Well these are Hyper-Hyper Bright...

     

    180-LED "Super Bright" Accent Light Kit...

    Includes a Multi-Function Remote Control...

    Engine Kit, Front-Rear Wheels Kit & Road Coverage Kit...
     

    "Super Bright" Motorcycle LED Accent Light Kit...

    De Beers
    De Beers sent me this photo... Real nice... Outstanding...


    I would like to thank Ryan for the following Review, he installed the Regular 180-LED Accent Kit so imagine what the "Super Bright" will do...
    "These lights are the best I have installed, easy, bright and the best thing is almost no special modification were needed. I have installed three (3) sets of accent lights with pods from a different manufacturer and I thought they looked good but compared to Joe's they can't compare. The strips are awsome and mount with almost no clearance. TELLING ALL MY FRIENDS." Ryan...
     

    Includes my "NEW" Multi-Function Remote Control...

    It Fades very dim then very bright, it has three (3) different Strobe function and it even has four (4) different levels of brightness...

    Yes, a Powerful Multi-Function Remote Control for your Single Color Accent Light Kits...

    This is the Ultimate in Single Color LED Lighting for Motorcycles

    SingleColor WaterProof & ShockProof 

     

    The 72-LED Engine Kit

    2 Strips  36-SingleColor LED Accent Light Flexible Strip... WaterProof & ShockProof...
    Strip.jpg



     
    Two WaterProof & ShockProof Flexible Strips   Two (2) Flexible Strip that are 20 inches long and has 72-SingleColor LEDs spaced less than 1/2 inch apart... Both ends of the Flexible Strip has connectors and supplied with 3 feet of Tube Covered Heat Resistant Extension Wire. You  can cut this strip one time and use both ends of the strip...
     
     

    Very Important: If you cut the strip put some silicone sealant (included) on the cut end after you secure the strip in place... Or a small piece of electrical tape wrapped around the cut end works just as well...

     
    Yes, It's "Super Bright" & WaterProof & ShockProof...
    Recomended Placement: Cut each strip into one of  27-LEDs and the other of  9-LEDs

    1) 27-LED Strip under the LEFT side of the gas tank...

    2) 27-LED Strip under the RIGHT side of the gas tank...

    3) 9-LED Strip behind the BREATHER between the two cylinder heads...

    4) 9-LED Strip behind the HORN between the two cylinder heads...

    Note: The reverse of the Flexible strip has 3-M adhesive that will stick to any cleaned surface...   

     

    And Then...

    The 36-LED Front & Rear Motorcycle Wheel Kit 

    Four Strips of 9-LEDs each...

    See Below... The Front Wheel Kit has two (2) Strips of 9-LEDs each with 6-Feet of TubeCovered Heat Resistant Wire attached to the Strip...  The Rear Wheel Kit has two (2) Strips of 9-LEDs each with 3-Feet of TubeCovered Heat Resistant Extension Wire to attach to the Strip...  Yes install The Front Wheel Kit to the inside of the fork on the right side and left side of your front wheel shining into the Wheel... Run the 6 feet of wire back to your battery area... Then install The Rear Wheel Kit to the right/left side of the rocker-arm shining into your Rear Wheel... Connect the two RED wire together and connect the two BLACK wires together...

    It is that easy...

     


     

    And Then...

    The 54-LED Road Coverage Kit

    Yes install the two 27-LED SingleColor WaterProof ShockProof Flexible Strip to the right and left side of the bottom frame point down to the hightway... This will shine down on the road and gives the effect that you are riding on a cloud of light...

    Each strip has three feet of Tube Covered Heat Resistant Wire... Just Run the 3 feet of wire back to your battery area... Connect the two RED wires together and connect the two BLACK wires together... 

    Note: Install the strips to your frame with the use of the supplied 3-M adhesive and plastic wire ties... 

    It is real easy...

    54-LEDRoadCoverageKit-2.jpg  

     

    And Then...

    Two (2) 9-LED Extra Strips  

    Yes you can alway use two (2) Extra Strips... That's two (2) 9-LED Flexible Strips to put anywhere on your bike to highlight chrome...

     

    And Then...

    Connect it all together

    Now Connect the Engine Kit, Road Coverage Kit, the Front & Rear Wheel Kit and the Two (2) Extra Strips to the Multi-Function Remote Control:


    Splice the RED (Positive) wires of the Engine Kit, Road Coverage Kit and the Front & Rear Wheel Kit together. Connect this wire to the BLUE wire of the Remote Control noted below as "To Positive of Lights".

    Splice the BLACK (Negative wires of the Engine Kit, Road Coverage Kit and the Front & Rear Wheel kit together. Connect this wire to the YELLOW wire of the Remote Control noted below as "To Negative of Lights".

    Then connect the RED wire of the Remote Control Box as noted below to the  Fuse Holder. Connect the other RED wire of the Fuse Holder to the Positive Pole of the Battery.

    Then connect the BLACK wire of the Remote Control Box as noted below to the Negative Pole of the Battery.

    Press one of the buttons of the KEY FOB and you have the most beautiful Motorcycle Accent Lights you have ever seen...


    Controller Dimensions: 2 1/2" X 1 1/2" X 1"

    New Remote!!!

    Yes, a Remote Control Wireless system is included...

    This one Blinks & Fades... 

    HOT! HOT! HOT! HOT! HOT!

    This Remote Control is three to four times more powerful than most Remote Controls on the market... Controls more LEDs and has more distance...


    Turn your LED lights on & off with my "Wireless Remote Control" from at least 100 feet to up to 200 feet away... You can also make them Strobe, Fade and even adjust the brightness with this Remote Control...

    This thing is HOT!!!  HOT!!!  HOT!!!

    2 - KEY FOBs REMOTE Units (battery already installed!)...

     

    This Kit Is Designed To Work On Any Bike Made...

    8 Ultra Bright LED Colors Currently Available:

    Blue (12,000 MCD)

    Green (15,000MCD)

    Red (10,000 MCD)

    Yellow (7,000 MCD)

    Purple (5,000 MCD)

    White (20,000 MCD)

    Orange (8,000MCD)

    Pink (8,000MCD)

     

    1) Please be advised that color PURPLE is still a UV color and is almost half as bright as any other color...

    2) The 5050 SMD Blub has three sections and normally this is used for RGB or MultiColor but in this case we are illuminating all three sections in the same color. Which is why this product is so bright it is thre blubs in one...The MCD figures above is the measurement of just one section of the blub... This 5050 SMD illuminated in such a way makes this product at least two times brighter if not greater than the normal 3528 SMD... 

     


     

       

       

    Yes an Engine Kit of  72-LEDs to accent the engine area, then the Front & Rear Wheel Kit of 36-LEDs to highlight the chrome of both wheels, then two extra Strips of 9-LEDs each to put anywhere you wish to highlight chrome and then top it off with the Road Coverage Kit of 54-LEDs that will shine down on the road to give the effect that you are riding on a cloud of light... A total of 180-LEDs in one kit connected to a Mult-Function Remote Control... Nothing like it on the market...

     This 180-LED "Super Bright" Flexible Strip Kit is the brightest kit on the market bar none... It's like a blast of light shining on your chrome... Like an eruption of light... An explosion of light... A detonation of light... I am sure you will get a bang out of it... 

    Check this kit when you first get... Do not install it... Just connect a Strip to your battery and if it is not the brightest kit you ever saw return it for a full refund and I will even pay your return postage... 


     

    180-LED "Super Bright" SingleColor WaterProof ShockProof Motorcycle Accent Light Kit

    Remember: A lifetime guarantee. I don't give you any mumbo-jumbo just a very simple lifetime quarantee: should a light ever burn out or stop working for any reason, return it and I'll replace it. No ifs, ands or buts about it. You don't like my Kit just return it for a full refund of your purchase price including shipping cost. No questions asked... I know you will like this kit so when you receive it Do not install it... Just connect a Strip to your battery and if it is not the brightest kit you ever saw return it for a full refund and I will even pay your return postage... 



     

    Here's What you Get...

    2 36-LED "Super Bright" Flexible Strips for the Engine Kit of Ultra High Brightness LEDs

    4 9-LED "Super Bright" Flexible Strips Front & Rear Wheel Kit of Ultra High Brightness LEDs

    2 27-LED "Super Bright" Flexible Strips for the Road Coverage Kit of Ultra High Brightness LEDs

    2 9-LED "Super Bright" Flexible Strips additional to place anywhere...

    1 Multi-Function Remote Control w/ 2 Key FOBs

     
    1 Fuse Holder w/ Two 3amp Fuses

    1oz Tube of Silicone Sealant

    10 4" Plastic Wire Ties

    5 Butt Splices

    10 Cradle Mounts

    2 E-Z Connect Wire Terminals

    4 Feet of Double 20 gauge Wire

    5ml Bottle of 3-M 94 Primer


    New & Improved Supply Kit

    OneTube.jpg 1oz Tube Silicone Sealant

    1oz Tube of Silicone Sealant is included to seal any cut ends of Flexible Strips...

     

     

    It's Included!!!

    3-M 94 Primer

    PREPPED: "To prepare or prime"

    Yes, 3-M 94 Primer is the best product on the market to prep the area where you are going to place the Flexible Strip. You will clean (degreaser) the location, you will rub the location with an included Alcohol Pad and one dry you will brush on the 3-M 94 Primer. Let dry for 3 to 5 minutes then secure the Flexible Strip to the location. Please understand that once you place the strip using these products and methods you will have to work at it to remove the strip. Be careful not to get 3-M 94 Primer on a noticiable finished painted or chromed surface. Best product to secure Flexible Strips in place.

     

     

     

    Are the LED Bulbs Waterproof?
    Just look at the picture below with the BLUE Strip in a vase of water... 
     

    Yes. If installed according to the instructions there is absolutely no way that water will affect the performance.

    How long will these lights last??
    Almost forever... well, 100,000+ hours of light time (that's over 11 years) and for a light bulb that's almost forever. Also, these lights generate no heat and draw about 3 mill amperes each.

     
     "Quality LED Accent Light Products at a Fair Price"
     
    Have a Blessed Day... Joe-Florida... 

     My no mumbo-jumbo life-time guarantee is good for as long as you own the bike. If a bulb burns out... You break one... Something doesn't work... whatever... I replace it free of charge...If you do not like my kit for any reason when you receive it just return the complete uninstalled kit within seven days of purchase and receive a full refund... No questions asked... And I will not abandon you after the sale... I am available to assist you with your installation just call or e-mail me.

    Be Blessed... JoeFlorida..

    Pray Everyday

     

    Legal Information

    Laws governing the use of custom lighting vary from state to state. Some of these lights or some of these colors may not be street-legal in some states, and are offered for off-road or show use only. Please check with your local authorities before purchasing.

     




    Add to Cart:

    • Shipping Weight: 1.5lbs
    • 35 Units in Stock




    Current Reviews: 1

    This product was added to our catalog on Thursday 14 July, 2011.