You will notice that there are connection wires at both ends of the Flexible Strips. This will allow you to cut the strip one single time in a multiple of 3 LEDs... You can install on most Cruisers an 27-LED strip under each side of the tank and a 9-LED strip behind the horn and another 9-LED strip behind the breather.The last strip cut into two 18-LED strip attached them to the right and left side of the bottom frame shining down  for ground effects. Make sure these two are not on the very center bottom of the frame but must be pointing and shining to the right and left outside.

This kit is an Explosive Multi-Color Accent Light Kit...

The Flexible Strips are 100% waterproof...

 Here's what you get:

Three (3) 36-LED Multi-Color WaterProof Flexible Strips

1oz Tube of Silicone Sealant is included to seal all cut ends of Flexible Strips... Any Strip that you cut or that was cut at the factory must be seal after installation of the Strip. The definition of a "cut strip" is any strip with connection wire on one end and nothing on the other. The end w/o the connection wire must be sealed with Silicone Sealant after the strip is installed. 

It's Included!!!

3-M 94 Primer

 PREPPED: "To prepare or prime"

Yes, 3-M 94 Primer is the best product on the market to prep the area where you are going to place the Flexible Strip. You will clean (degreaser) the location, you will rub the location with an included Alcohol Pad and once dry you will brush on the 3-M 94 Primer. Let dry for 3 to 5 minutes then secure the Flexible Strip to the location. Please understand that once you place the strip using these products and methods you will have to work at it to remove the strip. Be careful not to get 3-M 94 Primer on a noticiable finished painted or chromed surface. Best product to secure Flexible Strips in place. Use at your own risk!!!

108 LEDs in  RED-GREEN-BLUE Motorcycle Accent Light Kit...

This Kit Changes COLORS... It Will Stay On Your Color, Or It Will Flash, It Will Blink, Slow On & Off... The NEW Remote has 16 difference functions... Press a button and it stays on a single color or press a button and the LEDs change COLORS...

Yes, That's right SEVEN (7) different COLORS  plus Eight (8) different FADE, FLASH & STROBE settings... 15 AMPS with 180 WATTS of power that will activate the LEDs from at least 200+ feet away...

This is the one and only, Joe-Florida, bringing you another amazing Motorcycle Accent Light Kit... Nothing like it on the market at this price...

You can buy additional Multi-Color Flexible Strips for only $32.50 each...

Add all the EXPLOSIVE Multi-Color  YOU WANT...

This Kit Is Designed To Work On Most Any Bike Made with Two (2) Cylinders Heads You are looking at the most innovative and complete Motorcycle LED Accent Light Kit...  NO SPLICING  OF WIRES...  At the current price it is better priced than anything that changes color on the market and it is more complete, comes with a lifetime quarantee, even easier to install,  and maybe most important you get me and my legendary & celebrated "Joe-Florida Customer Service"... I don't pat you on the behind & leave you after the sale... I'm here...    

You cut the Flexible Strip once alone these lines... 

Multi-Color Motorcycle Accent Light Kit

Remember: A lifetime guarantee. I don't give you any mumbo-jumbo just a very simple lifetime quarantee: should a light ever burn out or stop working for any reason, return it and I'll replace it. No ifs, ands or buts about it.
Just "Plug" it in... 

New Improvement "1 to 5 RGB Connectors"

 

Yes the strips are WaterProof...

Remember: I have sold hundred's 1,000's of LED Accent Light Kits. And using my "Joe-Florida's Proven Wiring System" installation is not difficult, even I can do it... I will not let you fail...